Description
The M20 is a material handling machine developed by Officine Minelli, specifically designed for fast and continuous material handling operations. The 21-ton monster dazzles the operator with a 2500 mm axis and 2500 mm width, and the vehicle also complies with the EU STAGE V* emission standard.
What else does the M20 offer?
- the sound performance complies with the 2000/14/CE and 2005/88/CE standards,
- PowerCore® air filter with microcyclone pre-filter,
- 90 kW maximum power,
- automatic battery switch,
- integrated diagnostic system,
- automatic idle control,
- fuel filter with water separator and fuel preheater,
- 12 V DC water heater,
- electric fuel pump.
The hydraulic system
The Linde Load Sensing system ensures synchronized movements independent of load. This design results in precise control, a higher degree of operator comfort and significant energy savings.
The system consists of a Load Sensing modular proportional distributor with increased capacity for primary and secondary arm functions. It is powered by a variable displacement axial piston pump.
What else should you know?
The maximum rotation speed of the upper structure is 6-8 rpm. The maximum speed is 4 km/h in first gear and 12 km/h in second gear. The M20 also works with FEM-tested arms. For the 8.3 m boom, the curved arm reach is 4900 mm, while for the 9.3 and 9 m booms it is 5300 mm. The maximum reach is 9.3 m, while the axle load capacity for each arm is 22 tons. There is a negative brake system on both axles, and a reverse warning sound helps ensure safe working.
The TERA7 system
This innovative electronic diagnostic system communicates all the collected machine parameters via a 7” color display. It helps to understand these with easy-to-understand graphics. In addition to the anti-tip feature, it also warns the operator when problems or abnormalities are detected and indicates the level of the error. In addition, the system also provides information about service times.
